E-mail: sales@sintermatic.com
Tel: +86 1366 186 4045
Fax: +86 21 3965 0463
Exhaust muffler/Air silencers utilize porous sintered bronze directly bonded to nickel plated steel pipe threads to diffuse air and muffle noise from exhaust ports on valves, cylinders and air tools. They reduce noise by 15-20 decibels.
Used for: Oil, Gasoline or Air;
Operation Pressure:2MPa/ 300psi Max.;
Operation Temp:0°C-150°C/ 35°F-300°F;
Filtration:40 microns(standard)
Connect Thread: NPT 1/8"--NPT 1 1/2"; BSP 1/8"--BSP 1 1/2"; UNF 10-32;
Download catalog
Flow-Control Exhaust Muffler provide an variation of metering air flow at an acceptable sound level on exhaust ports of air valves. With linear adjusting ability, the flow of operating cylinder or air tool be increased or decreased with the adjusting screw. Exhaust air noise is eliminated by the surrounding sleeve of sintered bronze filter element.
Used for: Air or Gas;
Operation Pressure: 2MPa/300psi Max;
Operation Temperature:0°C-150°C/ 35°F-300°F;
Filtration:40 microns
Connect Thread: NPT 1/8"--NPT 1"; BSP 1/8"--BSP 1";
Download catalog
Push-to-Connect Mufflers have straight, unthreaded fitting connected to a plastic pipe. Easy install. The unit diffuse air and muffle noise from the exhausted ports, reduce exhaust noise to acceptable levels with OHSA noise requirements. Nickel plated steel fitting assembly with sintered bronze filter element.
Used for: Air or Gas;
Operation Pressure: 1.3MPa/180psi Max.;
Operation Temperature: 0°C-150°C/ 35°F-300°F;
Filtration: 25 microns(standard)
Download catalog
Breather Vents have many applications:vacuum relief or pressure equalization on gear boxes, oil tanks or reservoirs. Common use can be found on cylinders or valves to prevent dirt and foreign particles from entering ports open to the system. Nickel plated steel thread body sintered together with bronze powder.
Used for: Air or Gas;
Operation Pressure: 1MPa/ 150psi Max.;
Operation Temperature: 0°C-150°C/ 35°F-300°F;
Filtration: 40 microns
Connect Thread: NPT 1/8"--NPT 1 1/2"; BSP 1/8"--BSP 1 1/2";
Download catalog
The Hydraulic In-Line Filter provides protection for small, high pressure system. By using this filter at pressure side of a pump, foreign particles such as those created by pump wear are removed before damage the valve system.
Used for: Hydraulic system;
Operation Pressure: 20MPa/ 3000psi Max.;
Operation Temperature: 0°C-100°C/ 35°F-200°F;
Filtration: 25 microns (standard)
Connect Thread: NPTF 1/4"--NPTF 3/4"; 9/16-18 SAE; 3/4-16 SAE;
Download catalog
Low cost disposable In-Line Nipple Filter used for filtration of water, oil and air. The compact and light-weight design can be easily installed at the point of use. The conical shape of sintered bronze filter element provide a large filtering flow and a true uninterrupted axial flow.
Used for: Water, Oil or Air;
Operation Pressure: 2MPa/ 300psi Max.;
Operation Temperature: 0°C-150°C/ 35°F-300°F;
Filtration: 45 microns (standard)
Connect Thread: NPT 1/8"--NPT 1/2";
Download catalog
Y Strainer installed ahead of an external drain, traps debris and sludge; prevents malfunctions and extends the life of automatic drains. This Y Strainer equipped a sintered bronze filter element, provide more precise filter range than normal screen filter.
Used for: Hydraulic system;
Operation Pressure: 2MPa/ 300psi Max.;
Operation Temperature: 0°C-100°C/ 35°F-300°F;
Filtration: 40 microns (standard)
Connect Thread: NPT 1/2"; NPT 3/4";
Download catalog